Accessible pinout for SN75160BN

Part description: Octal general-purpose interface bus transceiver, DIP-20

Package description: This package has two parallel rows of pins extending down from opposite edges of the chip.

There should be a semicircular notch that you can feel in the middle of one of the package's shorter bare edges. With the pins facing downward and the chip oriented so notch is on the side of the chip furthest from you, Pin 1 will be in the far left corner of the chip.

Pins are numbered counter-clockwise. Numbers increase from the far left corner to the near left corner. They then continue on the right side, increasing from the near right corner to the far right corner. Thus the highest number pin is to the right of pin 1.

Pin assignments

Left side (numbering starts at far end)

Pin Signals
1TE
2B1
3B2
4B3
5B4
6B5
7B6
8B7
9B8
10GND

Right side (numbering starts at near end)

Pin Signals
11PE (active low)
12D8
13D7
14D6
15D5
16D4
17D3
18D2
19D1
20VCC

This pinout was automatically generated from the KiCAD symbol library revision 164574.

It is possible that there may be a mistake in the source data leading to wrong information on this page.