Accessible pinout for LM2937xT
Part description: 500-mA Low Dropout Regulator, TO-220
Package description:
This package has 3 pins on one edge, and a metal tab with a hole in the center on the opposite edge. The metal tab serves as a heat sink and can be soldered to a larger heat sink or attached with an M3 screw.
With the pins pointing towards you and the part flat on the table, tab side down, the pins are numbered 1, 2, 3 from left to right.
The metal tab may be designated as pin 4. It is typically electrically connected to the center pin.
Pin assignments
| Pin | Signals |
|---|---|
| 1 | VI |
| 2 | GND |
| 3 | VO |
This pinout was automatically generated from the KiCAD symbol library revision 164574.
It is possible that there may be a mistake in the source data leading to wrong information on this page.